SegwayChat
Home . Old Gallery

Go Back   SegwayChat > Segway Forums > Segway General Discussion

Notices

Segway General Discussion General discussion related to any model of Segways, miniPROs, or Ninebots. Please do not post non-Segway technology posts here; use the technology forum instead.

Old 10-01-2020, 12:13 PM   #1
planoguy
New Member
planoguy is on a distinguished road
 
Join Date: Dec 2010
Location: Texas
Posts: 3
5 yr Member
Default Segway I170

Long time member first time poster..

I have a Segway I170 with NI-MH batteries..
Due to an error condition I ignored my segway for a number of years.
So with our current worldy status I started investigating things with it again.
Batteries where in this status..

After leaving it charging over night...

Battery-1 Left-side voltage > 43
Battery-1 Right-side voltage > 43

Battery-2 Left-side voltage between 36 and 39
Battery-2 Right-side voltage between 36 and 39

Startup status....provided the 'unlocated fault' according to the Reference Manual.

Switching batteries made no change....

So with some discussion I was made to believe that one of my batteries may be the problem. So I opened it up (Battery-2) and with a Heat gun and patience the battery and board slid out via gravity...

Inspection of the 6 10-battery cells... showed lower voltage on all but 2.
So I inspected the individual cells and found 8 bad cells 0volts or less than 1 volt. So I proceeded to change those 8 cells.

Battery-2 Left-side voltage > 44
Battery-2 Right-side voltage > 44

so the Startup status has not changed...

So with Web and forum investigation I was curious if I had a HandleBar or CSB issue or cable issue.

Last night I read that some people suggested over time to switch the CU's .. So I proceeded to do this.

Startup status now is startup attempt is quicker.. but goes directly to a Full Circle Error with wrench...

So this is where I am .. Hopefully I didn't forget anything..

Hope someone out there has additional ideas..

Regards,
Eric
planoguy is offline   Reply With Quote
Old 10-06-2020, 08:44 AM   #2
DennisF
Junior Member
DennisF is on a distinguished road
 
Join Date: Aug 2016
Location: Illinois
Posts: 17
5 yr Member
Default Lack of Segway support is your problem

Eric:

My XT is in a similar state. From reading many threads on this site, I have come to the conclusion that unless I can find a way to reset the individual integrated circuit chips on the boards in the platform, my machine will never run again.

Segway seems to have decided to let all of the Gen 1 and probably Gen 2 machines die. There is no factory support for these machines any more. Their technology is proprietary and closely held, and that ability to reset a red circle with a wrench is not being released to the public domain.

With some tinkering, my best hope is to convert mine to a powered wheelbarrow.

If you learn of a solution, please let us all know.

DennisF
DennisF is offline   Reply With Quote
Old 10-06-2020, 06:32 PM   #3
planoguy
New Member
planoguy is on a distinguished road
 
Join Date: Dec 2010
Location: Texas
Posts: 3
5 yr Member
Smile In DFW

DennisF

I hear what your saying, I guess I'm still hopeful that with some work and exploriation I will discover my issue is not so great . From some items I've read some folks have had Red wrenches and reseating connections helped... and some had battery issues which once corrected solved their issues..

Of course right now I have no idea other than its one of the above or something else.. So for now its an electric paper wait.

I am very surprised how the original company was able to manufacture and sell without alot of support anywhere but Bedford.. I know I am simple..

Now that they are no longer in the SEGWAY business I wonder how it serves the company to keep their tech close to the vest ? May it would complete with their scooter or bike busness ???

I read about alot of work people have done with the Battery tech so that I guess was giving me hope about learning more about the systme if nothing else.. I friend of mine know about i2c protocols so we will see where that leads us..

Regards, Eric
planoguy is offline   Reply With Quote
Old 10-27-2020, 07:09 PM   #4
gsouser
Junior Member
gsouser is on a distinguished road
 
gsouser's Avatar
 
Join Date: Apr 2011
Location: Dallas
Posts: 37
5 yr Member
Default

It sounds like a battery issue to me, I have 4 Gen 1 models and had this issues myself. I run with NIMH batteries as to be allowed to travel on planes with mine. What style do you have? Rebuilt is around 800 a pair and 1500 for Lithium. I’m probably 60 miles from you if you want to bring it by and try my batteries to be sure


Sent from my iPhone using Tapatalk
gsouser is offline   Reply With Quote
Reply

Tags
battery, nimh, startup, trouble, wrench


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:23 AM.
Copyright © 2002-2023 SegwayChat.org.
All rights reserved. Not affiliated with Segway Inc.

FreshBlue vBulletin skin by
VayaDesign
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
SegwayChat Archive