06-21-2021, 12:21 PM | #1 |
Junior Member
Join Date: Dec 2010
Location: kennewick WA
Posts: 15
|
Does replacing electronic package need a reflash to complete?
I have a X2 that needs some electronic components replaced. Do I need to reflash the operating system after a component swap? Someone told me I did. I have a X2 that was giving error code e042. I replaced the gyro and did not fix the problem still gives same error code. I was thinking about swapping parts from my working i2 one at a time until I figure out which component is bad the X2. Is there any reason that won't work?
|
06-21-2021, 03:25 PM | #2 |
Junior Member
Join Date: Apr 2014
Location: Annapolis, MD
Posts: 35
|
Does the unit start and operate for a period of time, or does the E042 immediately appear upon start up?
|
06-21-2021, 07:36 PM | #3 |
Member
Join Date: Apr 2003
Location: Melbourne, VIC, Australia.
Posts: 991
|
A quick search shows:
E042 error which is CU A - BCA down So it seems that the A side control board cannot communicate with the battery. There are 2 likely reasons: 1 A bad battery 2 A dirty ( or broken ) connector. Or even a loose wire inside. Then there's lot more obscure types of errors. Good Luck Michael |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|