04-05-2019, 07:52 AM | #1 |
New Member
Join Date: Apr 2019
Location: Denmark
Posts: 1
|
Ninebot Es2 Error 18 and won't turn on
Hey
So i got the es2 second hand. 2 weeks ago, and then installed the external battery on it. After that i started getting the error 18 code. But today in the morning when i turned it on, i got the error 18 again. and after i turned it off it won't turn on again. And now i haven't been able to turn it on for some hours. I then disassembled the WHOLE scouter to see if i could see a problem, but i haven't got much experience, so i don't know what to look for. When i connect all the parts and push the button there is a little red light on the controlboard that flashes. I don't know what this means. How do i know if it's the display/ or control board that's broken. And Is there any posssible fixes for this.? |
04-20-2019, 08:32 AM | #2 |
New Member
Join Date: Apr 2019
Location: Vaucluse
Posts: 2
|
Is it like a flashing red spanner? I had that after my dashboard froze one. I removed the top section just below handle bars and unplugged & reconnected the internal battery connector and that solved my flashing issue. If this doesn’t work I’d take it in to get checked
|
05-15-2019, 05:20 PM | #3 |
New Member
Join Date: May 2019
Location: SanFrancisco
Posts: 10
|
is the output voltage of the battery in normal range?
|
05-31-2019, 07:08 PM | #4 | |
New Member
Join Date: May 2019
Location: Denmark
Posts: 2
|
Quote:
Code 18: Error phenomenon and solution: Motor hall abnormal, Check motor, Control board, Connected cable. Malfunction part: Control board, Motor. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|