SegwayChat
Home . Old Gallery

Go Back   SegwayChat > Segway Forums > Segway General Discussion > Reference Information & How-To's

Notices

Reference Information & How-To's Valuable reference information, stolen Segway reporting, how-to's, error codes & more.

Reply
 
Thread Tools Display Modes
Old 06-09-2015, 04:46 AM   #131
felix_fetche
Member
felix_fetche is on a distinguished road
 
felix_fetche's Avatar
 
Join Date: Mar 2010
Location: Baia Mare, Romania.
Posts: 166
5 yr Member
Default

E10A is the CAN communication interrupted between the CU and battery controller.
put wrapping wires between the resistors and the pads where the battery connector are soldered.
felix_fetche is offline   Reply With Quote
Old 08-03-2015, 07:36 PM   #132
rotorblades
Member
rotorblades is on a distinguished road
 
rotorblades's Avatar
 
Join Date: Mar 2014
Location: eureka -far northern calif
Posts: 290
5 yr Member HT/PT Owner Segway Polo Player SegwayFest Attendee
Default

Quote:
Originally Posted by gbrandwood View Post
Sorry if you thought you were going to get all the error code meanings on this thread - I don't have them. But between us all, we should be able to compile a list. So, please post any error codes you get from your PT and the associated meanings (if you know or as they become available). One thread to bring it all together might be helpful.

Was no list circulated at the fest?
can i tap onto a seg lithium battery without setting off a "code"im wanting to run my 12 volt strip lights then later aheadlight i realize i will have to reduce the voltage from 72 v. to 12 volts for these leds. it would be easier just to plug the one thing in to charge. had a stroke im pretty laid up still.im inclined to leave her alonei now use rechargeable hand drill batteries




'
rotorblades is offline   Reply With Quote
Old 03-08-2016, 02:34 PM   #133
Sheppy355
New Member
Sheppy355 is on a distinguished road
 
Join Date: Sep 2013
Location: England
Posts: 12
5 yr Member
Default Full list of error Codes and meanings here

HI guys i found this which should help you all out
Full list of segway I2 X2 error Codes and meanings here.

http://www.segway-ninebot.net/error-codes/

So far 100%
Sheppy355 is offline   Reply With Quote
Old 07-15-2018, 12:33 PM   #134
bekaz
New Member
bekaz is on a distinguished road
 
Join Date: Jul 2018
Location: Germany
Posts: 1
5 yr Member
Default

Quote:
Originally Posted by felix_fetche View Post
E10A is the CAN communication interrupted between the CU and battery controller.
put wrapping wires between the resistors and the pads where the battery connector are soldered.
Bună ziua Felix :-),

could you show where to make additional bridges with a cable?


Thank you very, very much for your help.

bekaz
bekaz is offline   Reply With Quote
Old 11-18-2018, 05:05 PM   #135
felix_fetche
Member
felix_fetche is on a distinguished road
 
felix_fetche's Avatar
 
Join Date: Mar 2010
Location: Baia Mare, Romania.
Posts: 166
5 yr Member
Default Solved E80E on a Gen2a X2 CU, using used i2 CU board

Bought one 2008 Gen2.a X2 with E80E code.
I fix the unit using a Gen2a i2 CU board as donor hardware.
Using Digital Signal Processor chip (TMS chip) from original X2 CU PCB,
moved to donor i2 CU.
Look at pictures.
First pictures is about prepairing, last step is final with chip soldered, and working.
Now unit is full functional.

Last edited by felix_fetche; 11-18-2018 at 05:18 PM.. Reason: Uploading Pictures.
felix_fetche is offline   Reply With Quote
Old 11-21-2018, 05:45 PM   #136
Cbuscemi
New Member
Cbuscemi is on a distinguished road
 
Join Date: Nov 2018
Location: Ponce Inlet Florida
Posts: 2
5 yr Member
Default Error code E01F.

Does anyone know what Error code is E01F means on a PT I2
Cbuscemi is offline   Reply With Quote
Old 05-13-2019, 11:49 PM   #137
cavpdx
New Member
cavpdx is on a distinguished road
 
Join Date: Aug 2009
Location: Forest Grove, OR
Posts: 13
5 yr Member
Default

Hi All,

My X2 threw error code E026. I've researched and found this code to be: "E026 CU A MOTOR WINDING TEMP FAULT". The same error code at another site is "E026 Actuator Fault CU A Reporting MOTOR WINDING TEMP FAULT Power base fault Follow SART diagnostic manual Replace power base."

Do I understand this correctly in that I am to replace Motor A?

Thank you!
cavpdx is offline   Reply With Quote
Old 05-14-2019, 03:47 PM   #138
MuttonChops
Member
MuttonChops will become famous soon enough
 
Join Date: Oct 2010
Location: Bothell, WA U.S.A.
Posts: 167
5 yr Member HT/PT Owner
Default Just Once or All the Time?

Quote:
Originally Posted by cavpdx View Post
. . . X2 threw error code E026. I've researched and found this code to be: "E026 CU A MOTOR WINDING TEMP FAULT". The same error code at another site is "E026 Actuator Fault CU A Reporting MOTOR WINDING TEMP FAULT Power base fault Follow SART diagnostic manual Replace power base."

Do I understand this correctly in that I am to replace Motor A?
Are you getting this error code all the time or did it just happen once or twice?

Even if you were doing regular gliding the computer(s)/sensor(s) can get confused every once in a while and force a shutdown and/or error code.

= = = =
11,800+ i2 Gliding Miles
MuttonChops is offline   Reply With Quote
Old 05-14-2019, 04:08 PM   #139
cavpdx
New Member
cavpdx is on a distinguished road
 
Join Date: Aug 2009
Location: Forest Grove, OR
Posts: 13
5 yr Member
Default

Hello! It happened and then I put the machine to charge. I came back after several hours and unit operated for half mile before faulting again.

Thank you, I love and miss my Segway. I have a SCI. I hope to get back soon.

Quote:
Originally Posted by MuttonChops View Post
Are you getting this error code all the time or did it just happen once or twice?

Even if you were doing regular gliding the computer(s)/sensor(s) can get confused every once in a while and force a shutdown and/or error code.

= = = =
11,800+ i2 Gliding Miles
cavpdx is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 06:25 AM.
Copyright © 2002-2023 SegwayChat.org.
All rights reserved. Not affiliated with Segway Inc.

FreshBlue vBulletin skin by
VayaDesign
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
SegwayChat Archive