02-06-2012, 04:01 PM | #111 |
New Member
Join Date: Apr 2010
Location: Ft. Worth, Texas
Posts: 2
|
EO2F errpr code w/blinking wrench!
My X2 started up fine this a.m......took a little jaunt and then plugged it back in. An hour later noticed one light was green and the top one red. I unplugged it for about 2 minutes and that didn't help. I tried to start it up anyway after unplugging it and got all flashing red lights with EO2F error code. Any help is greatly appreciated. Thank you.
|
02-09-2012, 11:34 PM | #112 |
Member
Join Date: Apr 2006
Location: Long Beach, CA
Posts: 1,127
|
Put the machine in security mode, plug it in to charge, and see if the lights go green after it reaches full charge.
|
02-26-2012, 07:28 AM | #113 |
Member
Join Date: Mar 2010
Location: Baia Mare, Romania.
Posts: 166
|
Fault is in front battery,
This is happening when not all the cells are measuring same voltage, or one cell voltage is out of range. |
08-13-2012, 10:21 AM | #114 |
New Member
Join Date: Sep 2011
Location: Cincinnati
Posts: 1
|
Error E044
Machine starts up, gives error code E044, then shuts back down. At one point the code changed to a E04C. Anybody have any ideas?
Thanks! |
10-14-2012, 06:25 PM | #115 |
New Member
Join Date: Oct 2012
Location: Half Moon Bay, CA
Posts: 1
|
E086
While in the middle of a perfectly lovely glide along the ocean-front road in beautiful Half Moon Bay, I got the dreaded BBBRRRRRRRRRRRRRRRRRT and an E086. Can anyone tell me what this is going to cost me?
CG&Ron |
10-15-2012, 12:40 PM | #116 |
Junior Member
Join Date: Feb 2012
Location: Southern California
Posts: 85
|
E086 is an error in the propulsion subsystem, so it definitely sounds like a power base issue.
Try resetting the Segway by taking the batteries off the base for an hour or so, and then putting them back on and attempting to start the machine up. YMMV... |
12-16-2012, 04:54 PM | #117 |
New Member
Join Date: May 2008
Location: Napa
Posts: 7
|
Has anyone had E080? I' getting this code with a wrench, and can't find anywhere that tells what it is.
|
01-08-2013, 05:18 AM | #118 |
Member
Join Date: Mar 2010
Location: Baia Mare, Romania.
Posts: 166
|
shure E080, not C080 ?
|
05-11-2013, 09:16 AM | #119 |
New Member
Join Date: Mar 2012
Location: Prague
Posts: 7
|
|
05-21-2013, 12:21 AM | #120 | |
Junior Member
Join Date: May 2013
Location: Gelsenkirchen, Germany
Posts: 27
|
C040
Quote:
I wondered what will happen when I activate riderless balance mode (by pressing one mat contact down). Since the whole thing wasn't perfectly leveled the wheels very slowly started to spin in riderless balance mode. By moving the LSF the wheels did respond accordingly - but still quite slowly. Then I activated rider balance mode (by pressing both contacts of a mat) and was actually a bit surprised that the Segway apparently tried to keep balance with full power and resulting heavy wheel spin for some seconds before powering down automatically. Infokey showed C040 and, I guess, the last measured "speed" of about 30km/h So just be careful with such experiments...
__________________
Best Regards, Toto To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. |
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
|
|