Segway Hauler

quan · 10-06-2006, 02:33 AM

Does anybody know if the Segway hauler for the generation 1 machines is compatible with the new i2/x2? I have the Segway 2" hauler part number 1833500003.

sholloway · 10-06-2006, 03:05 PM

I was hoping someone else would answer first. I don't think it is compatible. It looks to me that the leansteerframe is wider than the control shaft so that part that straps around the control shaft wouldn't accept the LSF. I didn't specifically check that. Since the shape of the LSF is very different than the vertical control shaft of gen1, I suspect that bracket that you strap the CS to is not in the right place anymore either.

I can't verify either of those, but that's what it looked like to me.

Dragan · 10-06-2006, 04:45 PM

Scott's correct...won't fit
Wayne

wwhopper · 12-09-2006, 09:47 AM

The Segvator is a great product, Dave from Segvator came by with a working model yesterday. Not only is it easy to use, it also has an inverter on it, so you can charge as you go.

Check out the website www.Segvator.com

They also support DRAFT and give each Segs 4 Vets reciepent a Segvator

Suzined · 12-11-2006, 11:32 PM

My Jeep has a 1 1/4" receiver for trailer hitch. My Toyota has a 2" reciever. Has anyone run accross a sleeve which will allow me to use a 1 1/4" Hauler with my Toyota? I'd rather not change out one of the receivers

dgbint · 12-11-2006, 11:49 PM

Hi

Segway supply the haulers with either a 1 1/4 or a 2 adaptor.
You may buy an extra adaptor, of either format.

So go talk to your local dealer and ask for either:
1903700001 1 1/4" adaptor or
1903700002 2" adaptor

This will make it a perfect for either receiver.

Michael

KSagal · 12-12-2006, 02:08 AM

In years past, I had a 1 1/4 inch receiver on my wife's car, and a 2 inch on mine... Most hitch places have an adapter, which is a 1 1/4 post with a 2 inch receiver... Just converts from one size to the other, very easy. Most hitch places and larger big box stores (Home Depot, Lowes, Walmart) have them. You do have to look hard some times... Even the auto chains stores (Auto Palace, Pep Boys) have them as well...

10-06-2006, 02:33 AM	#1
quan Junior Member Join Date: Jun 2005 Location: Geneva, GE, Switzerland. Posts: 32	Segway Hauler Does anybody know if the Segway hauler for the generation 1 machines is compatible with the new i2/x2? I have the Segway 2" hauler part number 1833500003.

10-06-2006, 03:05 PM	#2
sholloway Member Join Date: Mar 2004 Location: Atlanta, Georgia, . Posts: 901	I was hoping someone else would answer first. I don't think it is compatible. It looks to me that the leansteerframe is wider than the control shaft so that part that straps around the control shaft wouldn't accept the LSF. I didn't specifically check that. Since the shape of the LSF is very different than the vertical control shaft of gen1, I suspect that bracket that you strap the CS to is not in the right place anymore either. I can't verify either of those, but that's what it looked like to me. __________________ Scott Holloway To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. 404.993.6364

10-06-2006, 04:45 PM	#3
Dragan Member Join Date: Oct 2004 Location: Calgary, Alberta, Canada. Posts: 649	Scott's correct...won't fit Wayne __________________ Segway of Alberta - Calgary To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

12-09-2006, 09:47 AM	#4
wwhopper Advanced Member Join Date: Mar 2003 Location: Washington, DC, USA. Posts: 4,894	Got to use a Segvator yesterday The Segvator is a great product, Dave from Segvator came by with a working model yesterday. Not only is it easy to use, it also has an inverter on it, so you can charge as you go. Check out the website www.Segvator.com They also support DRAFT and give each Segs 4 Vets reciepent a Segvator __________________ Will W Hopper DCSEG Washington, DC, U.S.A.

12-11-2006, 11:32 PM	#5
Suzined Member Join Date: Sep 2006 Location: At the corner of Columbia and Pacific Posts: 448	Trailer Hitch Converter? My Jeep has a 1 1/4" receiver for trailer hitch. My Toyota has a 2" reciever. Has anyone run accross a sleeve which will allow me to use a 1 1/4" Hauler with my Toyota? I'd rather not change out one of the receivers

12-11-2006, 11:49 PM	#6
dgbint Member Join Date: Apr 2003 Location: Melbourne, VIC, Australia. Posts: 991	Speak yo your dealer ! Hi Segway supply the haulers with either a 1 1/4 or a 2 adaptor. You may buy an extra adaptor, of either format. So go talk to your local dealer and ask for either: 1903700001 1 1/4" adaptor or 1903700002 2" adaptor This will make it a perfect for either receiver. Michael

12-12-2006, 02:08 AM	#7
KSagal Glides a lot, talks more... Join Date: Jan 2004 Location: Pelham, NH, USA. Posts: 10,356	In years past, I had a 1 1/4 inch receiver on my wife's car, and a 2 inch on mine... Most hitch places have an adapter, which is a 1 1/4 post with a 2 inch receiver... Just converts from one size to the other, very easy. Most hitch places and larger big box stores (Home Depot, Lowes, Walmart) have them. You do have to look hard some times... Even the auto chains stores (Auto Palace, Pep Boys) have them as well... __________________ Karl Ian Sagal To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. "Well done is better than well said." (Ben Franklin) Bene factum melior bene dictum Proud past President of SEG America and member of the First Premier Segway Enthusiasts Group and subsequent ones as well.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)