11-07-2019, 02:42 PM | #1 |
New Member
Join Date: Nov 2019
Location: California
Posts: 2
|
Handlebars Issue for Ninebot Minipro
My wife and I purchased a Segway Ninebot Minipro a few months ago and we decided to order a handlebar accessory. I literally just got the handlebars last week and am having issues removing the knee bar - the very kneebar that I installed when we got the Segway. I removed the screws, but it's as if it's welded in place. It will not move out of the square hole. My wife and I would LOVE to try the handlebars. Any ideas?
|
11-11-2019, 12:07 AM | #2 |
New Member
Join Date: Aug 2019
Location: Texas
Posts: 9
|
I hooked the claws of a claw hammer under the edge. I then tapped, not hit, it to lift it up. It came off after a few taps.
|
11-11-2019, 09:56 AM | #3 |
Member
Join Date: Jul 2013
Location: Arizona
Posts: 555
|
|
11-11-2019, 11:00 AM | #4 |
New Member
Join Date: Aug 2019
Location: Texas
Posts: 9
|
Yes, anything that can get under the lip and be tapped with a hammer will work.
|
11-13-2019, 06:52 AM | #5 |
Junior Member
Join Date: Sep 2005
Location: Auckland, New Zealand.
Posts: 81
|
miniPRO handlebar tips
To remove it, you can also use a strap (like a thin belt) to slip behind it, and pull hard. But I like the claw hammer idea better, I think.
What you really want to do is apply some lubricant (eg grease) before attaching it to the shaft for the first time. And if you didn't do this at first and have now successfully pulled it off, do add some lubricant before you reinstall it.
__________________
Segway New Zealand / Personal Transport Limited • Read the Segway NZ News blog at To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|