02-28-2010, 05:41 PM | #11 |
Advanced Member
Join Date: Nov 2004
Location: North west England, UK.
Posts: 3,043
|
Bring it back
Anyone remember the original intended design that never made it into production (or at least, was never sold - H&S issues again if I recall)? This looked best in my opinion and would be easy to grip:
"LeanSteer Frame Tool-less Height Adjust"
__________________
Gareth Brandwood The comments posted are made by the fat figners of the individual and do not necessarily represent the views of the brain. |
02-28-2010, 06:47 PM | #12 |
Senior Member
Join Date: May 2007
Location: San Jose, CA - USA
Posts: 1,314
|
I think the thing many of you are forgetting is that by increasing the friction against the shafts without increasing the torque you have to put on the thread is a VERY GOOD thing.
That is a very small diameter screw that you really don't want to strip!
__________________
sǝʞɔɐq ɟɟǝɾ If I had known I was going to live this long, I would have taken better care of myself. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. |
02-28-2010, 11:05 PM | #13 |
Member
Join Date: Jan 2003
Location: Seattle, WA
Posts: 1,175
|
I got the best solution as a tip from Jim Headley.
If you have the old-style i2 height adjuster, the one that used the hex screw, just use the new height adjuster screw with the old, slightly convex, gripper piece. Works like a charm.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. |
03-01-2010, 09:05 PM | #14 |
Member
Join Date: Sep 2008
Location: SF
Posts: 123
|
I just received 2 of these from team222badbrad. They are awesome! Very rigid and I don't see them cracking or bending at all.
Thanks again Brad! |
03-02-2010, 11:36 PM | #15 | |
Member
Join Date: Dec 2008
Location: Northeastern Pennsylvania
Posts: 303
|
Quote:
To make things easier I just put this on ebay for $16 shipped to the USA. Got to love the 12% profit ebay makes... http://cgi.ebay.com/ws/eBayISAPI.dll...m=280473008399 |
|
03-07-2010, 06:55 AM | #16 |
Junior Member
Join Date: Jul 2009
Location: Lancaster, PA
Posts: 32
|
Another solution
I'm not sure if anyone else has tried it, but I use a rubber jar opener. I have a nasty habit of over-tightening and snapping or stripping bolts and screws. This little gadget lets me get a good grip without over-tightening. It's not the best solution, but it's cheap. And if you're lucky, you might already have an extra one or two in a kitchen drawer.
Bob
__________________
Bob S |
04-08-2010, 02:02 PM | #17 |
Member
Join Date: Jul 2007
Location: Columbia, MD
Posts: 200
|
I also bought two of these and love them. I'm going now to eBay to buy six more!
__________________
Bob Velke SegTours of Gettysburg, PA To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. |
04-09-2010, 07:48 PM | #18 |
Member
Join Date: Dec 2008
Location: Northeastern Pennsylvania
Posts: 303
|
|
04-19-2010, 04:20 PM | #19 |
Member
Join Date: Sep 2008
Location: mechanicsville, va
Posts: 166
|
washer and knob solution(sort of)
Since 2009 the additional washer solution is one I've used.
I give demo rides when I can. This involves adjusting the handlebars frequently. The problem I've experiencced with this washer method is that while I have decent muscle control and strength it seems I rarely can hand tighten the knob enough so that when adjusting the handlebars or pulling the PT up steps I find it frequently slips. On the flip side is that when I do manage to tighten the knob I then have difficulty in loosening it so as to make height adjustments for demo rides. My solution to this has been to leave the knob loose all the time. Now hear me out!. I have found that when going down steps if you lightly grip the knob with one hand and guide the PT with the other the washer does help hold the height position in place. Yes, it's a two handed operation but one I find easier than fighting with the tightening and loosening of the knob. I do like the idea of a bigger or different shaped knob.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. the PONY SEAT |
02-03-2018, 09:59 PM | #20 |
First Timer
Join Date: Nov 2017
Location: travel full time in rv
Posts: 1
|
The threads have stripped on my lean steer height control knob. Adding a washer won't help. Does anyone know the bolt size/diameter & thread count on the tightening knob? The closest I can guess is a #6 UNF fine thread, 40 threads per inch, but I don't know if it may be metric. I don't want to pay $40 or more for a replacement when I can replace it with a hex bolt for under a dollar.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|