12-07-2007, 02:59 AM | #1 |
Junior Member
Join Date: Nov 2007
Location: Keewatin, ON. Canada
Posts: 88
|
Tube flat
I haven't used my Segway in about 5 weeks and now both tires are extremely low, way too low to ride on. Could you let me know if this is a problem with i2 Segways or just mine? If it is the valve core, why? if it just dissipates then why? How do I rectify this problem as I have a disability that wouldn't allow me to kneel and fix flats so do I now put Slime or ? in the tube to eliminate the problem? Please help as I only have 3 weeks before I go on holidays. Thanks, Tory
|
12-07-2007, 03:06 AM | #2 |
Senior Member
Join Date: Jun 2007
Location: Santa Ana, CA
Posts: 1,335
|
If the tires aren't actually flat but simply low and especially since it's both tires, it's probably not a leak but air dissipating out of the tires as usual. All "normal" tires do this.
Slime is a good preventative measure however for flats and may even slow down some of the normal air dissipation so you can either search for the information already on this web site or simply wait for other, more experienced people than myself, to explain the procedure to you. I'm nearly certain our resident Slime expert, cmonkey, will chime in here soon.
__________________
Harry Potter may fly a broomstick, but I ride a magic lawnmower. |
12-07-2007, 04:14 AM | #3 | |
Senior Member
Join Date: Sep 2006
Location: SoCal
Posts: 1,795
|
Quote:
When was the last time you measured the pressure; could it be that it was low but rideable 5 weeks ago? As Quade pointed out, air does migrate out of any tire and you need to check them regularly. Did you by any chance ride the Segway through any fields where you might have picked up thorns? For you to have picked up glass or tacks in both tires at once would be rare. As for Slime, you'll find plenty of posts if you search. Just be advised that there has not been a single post citing a successful long-term patching of an i2 tubed tire. I tried using it and it leaked, but as you might see in the search, it was pointed out that I really don't know for sure that my tube's failure was because of a thorn as I suspect (it went back to INC), so I cannot say categorically that it won't work in low pressure applications -- but that is what I believe. Slime in tubeless tires seems to work very well for a number of people who have posted.
__________________
_______________________________________________ _______________________________________________ John Kuhn |
|
12-07-2007, 09:15 AM | #4 |
Advanced Member
Join Date: Mar 2003
Location: Washington, DC, USA.
Posts: 4,894
|
Tire Pressure is one of the only Mainteance Items on a Segway
I would say that 9 out of 10 machines that come into the dealership are low on air, and the 10th, just had air put in it yesterday.
Like in your car, air pressure in your tires is important, and it should be checked every week. You could have a valve stem that is leaking a bit, but in the case of two tires that are both down on air pressure, it is probably has not been checked in a long time. Start a weekly journal on it, when you ride it, check the air pressure once a week (or in your case, have someone else do so) With the I-2 it is a PIA as you have to put the unit on it's side. You should have to add air at least monthly. More so when the tempature changes. Slime will help with air leakage, but not with the seasonal changes in the air pressure that you find when it gets cold in the fall and winter.
__________________
Will W Hopper DCSEG Washington, DC, U.S.A. |
12-29-2007, 12:00 AM | #5 |
Junior Member
Join Date: Nov 2007
Location: Philadelphia
Posts: 45
|
Checking tire pressures
Last time I checked my I2 tire pressures (rasslin' the unit to the ground and removing wheels one at a time) and saw how low they were, I started cogitating on a better system. I kept looking at my large milk-crates in the basement, and kept thinking about emptying one and seeing how the I2 seats on top.
Finally today, emptied a large milk-crate (flipped it) and learned how perfect the I2 sat on top. Pulled both without any trouble (after marking the wheel and stud); cleaned up everything under the wheels. I took one of the wheels to a bike shop that I haven't visited in years. They were very interested in my story, and are working on finding a special shrader-valve extension tube they used to sell for a particular long reach tire. Made some new friends. With the I2 up on the crate, reaching is not really an issue anymore. Even powered-up and ran the wheels a little. Makes for a good display. Didn't take much to make me happy. Healthy New Year!!!
__________________
All gave some; some gave ALL Effort equals results - Roger Penske "when I look-up at the stars, I don't see Darwin's work, I see God's work" GMA |
12-29-2007, 11:11 AM | #6 |
Last of the Early 30
Join Date: Dec 2002
Location: Yelm, WA
Posts: 4,679
|
Segdog, if they work out that valve stem extender, let us all know! The tires and the refilling of them is the second most annoying thing about the i2.
Pam |
12-29-2007, 01:34 PM | #7 |
Senior Member
Join Date: Sep 2006
Location: California
Posts: 2,114
|
|
12-29-2007, 06:33 PM | #8 |
Last of the Early 30
Join Date: Dec 2002
Location: Yelm, WA
Posts: 4,679
|
|
12-29-2007, 07:01 PM | #9 |
Member
Join Date: Apr 2006
Location: Long Beach, CA
Posts: 1,127
|
Pam, I've had my LSF on & off the i2 many times for toting around in the car, and I've never had this problem. I've just followed all the advice given on here. For me it's just a matter of preliminary assembly and initial tightening (rock the LSF left & right / fore & back as you initially tighten the screw), strong-arming it around a bit, re-centering, then final tightening. Make sure all the parts and seating surfaces are clean & dry, and that you're torquing the screw tight enough.
|
12-30-2007, 02:15 AM | #10 |
Senior Member
Join Date: Sep 2006
Location: California
Posts: 2,114
|
That sucks.
You might want to see if you can get a replacement LSF bolt... My old one kept getting loose (from the lock kit, the cheaper bolt seemed to strip easy). The new one, once tightened properly, doesn't appear to move like the other one did... You do have to give it a good couple torques with the wrench to keep it from getting loose. Make sure the tool fits the head perfectly, or you could end up blistering out the head and make it harder to tighten in the future... BTW, the Segway Color Kit contains a New LSF bolt, Entire LSF, Brass LSF Clamps, Handlebars, etc. It might help solve your problem, if you are getting it tightened on properly, but it's still not staying put? SEGsby |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|