06-07-2008, 05:56 PM | #1 |
New Member
Join Date: Jun 2008
Location: Florida Keys/Midcoast Maine
Posts: 2
|
Help me disassemble i170 PLEASE!
My unit got caught in the rain, water is pouring out of the control shaft clamp bolt hole, and we're leaving for NYC for a week first thing in the morning, so I REALLY, REALLY want to take it apart to dry.
I removed the control shaft clamp bolt, but the handlebar assembly won't budge. I'd really appreciate some suggestions. Thanks Jeff |
06-08-2008, 03:26 AM | #2 | |
Senior Member
Join Date: May 2007
Location: San Jose, CA - USA
Posts: 1,314
|
I have a howto posted already
Been there, done that...
Segway Social Link on Recovering from a water event I wrote this up a few months ago, let me know if you need any more information. jeff Quote:
__________________
sǝʞɔɐq ɟɟǝɾ If I had known I was going to live this long, I would have taken better care of myself. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. |
|
06-08-2008, 11:44 AM | #3 |
Member
Join Date: Jun 2003
Location: Houston, TX, USA.
Posts: 701
|
Try twisting the handlebars in a sterring a bicycle sort of motion while pulling up. The control shaft should lift up from the CSB at the base about three inches and come out. Then disconnect the two wires and it should be free to work on.
|
06-09-2008, 12:41 AM | #4 |
Senior Member
Join Date: May 2007
Location: San Jose, CA - USA
Posts: 1,314
|
I updated the Wiki to better explain how to remove the control shaft
__________________
sǝʞɔɐq ɟɟǝɾ If I had known I was going to live this long, I would have taken better care of myself. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|