Camera mount

Don · 04-03-2003, 03:29 PM

I am very interested in anyone successfully using the Segway as a camera dolly

Stan671 · 04-03-2003, 06:33 PM

I have mounted a digital camera on the right side of the handle bar and I have mounted it on the front of the control shaft near the bottom. I just used rubber bands and short bungee cords.

But I have a feeling you were asking about something more sophisticated.

Stan Dobrowski

phantom1 · 04-30-2003, 09:07 PM

I have successfully mounted a digital video camera to the handle bar using the two 4mm bag mounting holes located under the handle. I fabricated a bracket that could hold my camera, GPS and bike headlight. It took a couple of tries to eliminate the bounce caused by a bracket that wasn't stiff enough. The videos were very bouncey so I ended up using the mount just for the GPS and headlamp.

[email protected]

cosmo · 05-01-2003, 03:49 AM

I have mounted a video cam to the control shaft using an "Ultrapod II" from
PedcoPods - http://www.pedcopods.com/

-cosmo-

04-03-2003, 03:29 PM	#1
Don New Member Join Date: Apr 2003 Location: , , . Posts: 1	Camera mount I am very interested in anyone successfully using the Segway as a camera dolly

04-03-2003, 06:33 PM	#2
Stan671 Senior Member Join Date: Jan 2003 Location: Rutherford, NJ, USA. Posts: 2,331	I have mounted a digital camera on the right side of the handle bar and I have mounted it on the front of the control shaft near the bottom. I just used rubber bands and short bungee cords. But I have a feeling you were asking about something more sophisticated. Stan Dobrowski

04-30-2003, 09:07 PM	#3
phantom1 New Member Join Date: Apr 2003 Location: , , USA. Posts: 3	I have successfully mounted a digital video camera to the handle bar using the two 4mm bag mounting holes located under the handle. I fabricated a bracket that could hold my camera, GPS and bike headlight. It took a couple of tries to eliminate the bounce caused by a bracket that wasn't stiff enough. The videos were very bouncey so I ended up using the mount just for the GPS and headlamp. [email protected]

05-01-2003, 03:49 AM	#4
cosmo Member Join Date: Dec 2002 Location: , CA, USA. Posts: 132	I have mounted a video cam to the control shaft using an "Ultrapod II" from PedcoPods - http://www.pedcopods.com/ -cosmo-

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)