02-15-2018, 12:05 PM | #1 |
New Member
Join Date: Feb 2018
Location: Canada
Posts: 2
|
Segway mini lite charging port loose
Greetings everyone,
I just bought a mini lite from ebay (warranty not honored by Segway therefore). the problem is that the charging port is not snug. when battery charger connector is inserted into battery port for charging, the light on the battery charger remains green unless I slightly push up the battery charger connector with my hand or use the battery port rubber protector to force up the connector. then and only then the indicator will turn red (indicating that the charging is taking place). this is quite a nuisance, b/c in my experience there will be a time where things will be loose enough that it will not charge. Any guidance is really appreciated. Thank you. |
02-16-2018, 10:35 AM | #2 |
Junior Member
Join Date: Mar 2017
Location: Hillville, TN, USA
Posts: 68
|
This WILL sound like a wiseguy answer, but FIX IT! We have a mini-pro for her and I will try and see what is involved. I'll get back on this but you look in the meanwhile, too.
Karl |
02-16-2018, 03:42 PM | #3 |
New Member
Join Date: Feb 2018
Location: Canada
Posts: 2
|
Thanks dude, looking forward to the answer.
|
02-16-2018, 09:58 PM | #4 |
Member
Join Date: Jul 2013
Location: Arizona
Posts: 555
|
Only a wild guess, that a long nose pliers, bend those male forks a tad....see if that gets a solid connection...
and....You might think of a strain relief in opposite?....If the cord needs pressure to the right, maybe some rubber bands, string or twine? Yes its not a fix, but you have what you have...now lets make it work? Last edited by airdale; 02-16-2018 at 10:02 PM.. Reason: add |
02-17-2018, 10:42 AM | #5 | |
Member
Join Date: Dec 2016
Location: USA
Posts: 168
|
Quote:
Likely, a kid was ham fisted with putting the plug in and messed up something. The key for the four pronged socket is on the side instead of bottom, if it is like the minipro, which isn't intuitive. If the whole charging port is loose from the frame where the back nut came off, then you need to look at some disassembly videos to fix it. |
|
02-17-2018, 06:48 PM | #6 | |
Junior Member
Join Date: Dec 2017
Location: New Jersey
Posts: 88
|
Quote:
|
|
11-26-2018, 09:34 PM | #7 |
New Member
Join Date: Nov 2018
Location: NC
Posts: 1
|
I have the same issue. Charging port on the mini lite is the issue. I stripped a small 22ga wire and stuck in the port, then inserted the barrel plug. Charging normally now. There is only 1 contact point inside the barrel hole (-). This small sping is pushed in and no longer makes contact with the outer plug barrel grounding surface. I may open it us and see if I can push the small piece back out to make contact
Cannot post image yet but I made a sketch. Just shine a light into your port, the small metal strip on mine was located at 9'oclock. Should have been 2 contacts, think of a 12v cig lighter plug... |
01-08-2019, 09:52 AM | #8 |
New Member
Join Date: Jan 2019
Location: Georgia
Posts: 2
|
Hi, I have the same problem on 2 of the 3 MiniLites that we have. At first I thought maybe it was the charger but all of the chargers work great on the one lite and requires wiggling on the other 2.
For an adult this might not be a problem, still annoying for a brand new device, but for the kids it's kind of finicky. |
01-09-2019, 06:09 PM | #9 | |
Member
Join Date: Apr 2003
Location: Melbourne, VIC, Australia.
Posts: 991
|
Quote:
I am not familiar with the miniLite, but I know those connectors well. There are 2 versions, one with a 2.1mm center pin, and one with a 2.5mm center pin. For it all to work and connect properly both the plug and socket must match. I 'guess' that somewhere along the line, somebody messed with it and almost got it right. Make a visit to your local electronics shop, or eBay, and buy a few cents worth of connectors. It will be an easy fix, if I am right. Michael www.dgbint.com |
|
01-09-2019, 06:38 PM | #10 | |
New Member
Join Date: Jan 2019
Location: Georgia
Posts: 2
|
Quote:
Thanks, are you suggesting to go get the correct size barrel and resolder it in? |
|
Tags |
charge, charging, loose, port |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|