the last word from dorrington was..
Quote:
when you reassemble the pack, start with the big negative black wire and work your way around pole by pole until you get to the big red one.
DONT LET ANY WIRE TOUCH ANYTHING OTHER THAN THE PLACE IT LIVES...AND IN ORDER.
do not solder on the board, remove the wires from the battery and solder them back in the board first
check, check and double check..if you get the polarity wrong at any point bms and / or segway will be destroyed!....
|
Im just about done replacing cells and about to re-assemble as well. If you can post some pics and tips of the reassemble cvhsquared, that would be awesome.