Quote:
Originally Posted by truck
I'll check pressure but is there anything else it could be?
|
1. Tire Pressue
2. Terrain- I’m sure you ruled this out
3. Leansteer- make sure it’s on straight, if it’s mounted a little off to either side the weight of it could cause pressue and cause this motion.
4. Leansteer Sensor (LS Sensor)- possibly out of calibration. This is the sensor that activates when you push the Leansteer either left or right. Not user repairable. You can have a dealer send the Pivot Assembly to Segway and they will install a new sensor and calibrate it.
5. EMI Filter- possible... this part is between the LS Sensor and the BSA. Typically when you replace the LS Sensor you replace the EMI Filter at the same time.
Also, if you are experiencing any jerky motion turning, then the LS Sensor is the issue.