Making one good PT out of two half-good PTs
It sounds like you can make one good PT out of your two half-good PTs for possibly as little as no cost other than you time.
The unit with E406 probably requires a new CU Board, which will require sending it to a Segway Service Agent capable of doing Level 3 & 4 service.
The unit that won't charge only needs to have its bad charger component swapped out and have the good one installed (from the E406 unit). You will also need to swap the radio boards. All of these parts are quite accessable, and a Segway Service agent trained to Level 2 service can do this for you. There are people on this list who might be so kind to explain step by step you how to do this in detail, if you were so inclined.
That would give you one perfectly good machine, at least until you get your 3rd battery back. What to do after that point depends upon your access to a local/region service agent doing Level 3 & 4 and associated repair costs.
Regards
Philip
__________________
Segway New Zealand / Personal Transport Limited • Read the Segway NZ News blog at To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|