Thanks for the links. The arduino is a bit over my head, but I'll look into it. I'm still thinking this is not a battery problem however. The NiMH batteries have two 36v packs on each side of both batteries. I'm reading each side of them at over 40v and they hold a strong charge. I've read the Canlas trickle charge method that was uploaded here, but the batteries are fully charged (I believe) and I don't believe there would be any room for more charge. Where it states the batteries wont charge if they dip under 42v it is referring to the lithium packs. But the NiMH have two sides of 36v each and again, they are reading at over 40v per side. I think it's more wires or something on the board, but I'm very new to this.
|