I have the same issue. Charging port on the mini lite is the issue. I stripped a small 22ga wire and stuck in the port, then inserted the barrel plug. Charging normally now. There is only 1 contact point inside the barrel hole (-). This small sping is pushed in and no longer makes contact with the outer plug barrel grounding surface. I may open it us and see if I can push the small piece back out to make contact
Cannot post image yet but I made a sketch. Just shine a light into your port, the small metal strip on mine was located at 9'oclock. Should have been 2 contacts, think of a 12v cig lighter plug...
|