Thread: Infokey
View Single Post
Old 08-10-2018, 10:26 AM   #2
airdale
Member
airdale will become famous soon enough
 
Join Date: Jul 2013
Location: Arizona
Posts: 555
5 yr Member
Default

Beginner Button Functions The following functions can be performed using the Beginner button.
Enabling and Disabling the Beginner Setting 1. To disable the Beginner Setting, confirm that the Beginner icon (turtle) is displayed, then tap the Beginner button. The Beginner icon will no longer show in the Display. 2. To enable the Beginner Setting, confirm that the Beginner icon is not displayed, then tap the Beginner button. The Beginner icon will show in the Display.
See "Unlocking and Locking the Beginner Setting" (p. 48) for more information.
The PT will only accept these commands when no Rider Detect Sensors are depressed (when there is no weight on the Mats).
Illuminating the Backlight 1. Press and hold the Beginner button to illuminate the Backlight. 2. Release the Beginner button to turn off the Backlight.
---------------------------------------------------------------------------------------

InfoKey Controller (cont.) Button Combination Functions The following functions require you to simultaneously push a combination of InfoKey Controller buttons.
Unlocking and Locking the Beginner Setting For your first ride, the PT is set to operate exclusively with the Beginner Setting enabled. If the Beginner icon (turtle) does not display, do NOT ride the PT until you enable the Beginner Setting. The PT ships from the factory with the Beginner Setting locked, to encourage new riders to learn using the Beginner Setting. To unlock the Beginner Setting: 1. Power on the PT. 2. Press and hold the Beginner Button and the Information Display Button simultaneously for more than 10 seconds. The Information Display button will flash. 3. Make sure the PT has not entered Balance Mode. 4. Confirm that the Beginner icon (turtle) toggles when the Beginner button is tapped.
Once the Beginner Setting is unlocked, you can toggle the Beginner Setting on or off by tapping the Beginner button.
To lock the Beginner Setting: 1. Repeat Steps 1 and 2 above. 2. Confirm that the Beginner icon (turtle) is showing on the InfoKey Display. 3. Test the lock by tapping the Beginner button and confirming that the Beginner icon remains showing in the InfoKey Display.
airdale is offline   Reply With Quote