ERROR in Gen1 blinks red with circle and wrench
i have gen1 segway wich starts like normaly for one second then turns into red blincking showing the entire circle with the wrench at right, together with the specific sound of fault.
what could be the origin of the fault ? i need help. thanks! |
Have you checked the cable connections, and swapped batteries?
Also see: http://forums.segwaychat.org/showthread.php?t=27637 |
hi,
it was the farst action to refit batteries, and next step to swap them. also all the cables between CU`s<->CSB and CSB<->handlebar i cleaned well with contact spray... same bahaviour. tomorrow morning i will swap CU boards. i my mind is flickerin one ideea,... maybe battery conectors of CU boards are with soldering problems. the solder may crack from vibrations. i will resolder them. keep you informed... saga will continue!!! |
I've had similar issues on my three machines, gen 1 and gen 2.
All were "fixed" by removing the batteries and then ever so slightly bending the data pins on the batteries off center. This tightens and even burnishes the connections between the Segway CU boards and the batteries when they are reattached. Contact cleaner can also sparingly be used to further clean the connections by installing and removing the batteries several times to burnish the connections. I'm sure there are skeptics out there, but this has worked for all three of my machines. YMMV... |
Quote:
In the case mentioned here, it's not a battery fault. The display indicates otherwise, and the OP has swapped batteries with no change of symptoms. |
The problem isn't with the batteries themselves, but with the connectors on the CU boards.
My i2 was sold to me throwing an E042 error no matter what batteries were put on the machine, new, swapped, or whatever. After performing this 'trick' on the batteries and using them to burnish the connectors on the CU boards, the i2 has performed flawlessly for the last 300 miles. My X2 was sold to me having 'bad batteries'. The battery level meter would jump from 'full' to near 'empty' very quickly. Again, after performing this 'fix', that machine has also worked perfectly. My i167 was throwing the red display + wrench like the OP. After again doing the 'fix', the machine started right up and worked fine. It does have a weak battery, but no more wrench icon on the display. -i |
so,
i resoldered the battery connectors of the CU boards, booth, still fail, same way. swap the CU boards, all the same behaviour. please take a look at the video i`ve recorded for more acuracy of failure description. a foto or a video allways more tha thousand words. i can post another video with CU boards at starting to see LED light secventioning. https://www.youtube.com/watch?v=80Qx9VJgNzE |
Quote:
|
i dont know, i bought the platform from ebay.
http://www.ebay.de/itm/Segway-Gen-1-...item35c2283c96 http://www.ebay.de/itm/Segway-CSB-Ki...item35c1f7d3d9 http://www.ebay.de/itm/230887540599?...84.m1497.l2649 all parts are from one single maschine. seller says is all functional, i asked him befor to get in auction. anyhow i have two pairs + one extra, i mean 5 batteryes, all tested. |
Quote:
Did the batteries come from the same seller? What technology are the batteries? It is really really really hard for us to "have a clue" if we don't know the entire situation. And we waste a lot of time asking questions. ..and making guesses. For instance, I "guess" I know what the problem is. |
All times are GMT -4. The time now is 09:32 PM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2002-2024 SegwayChat.org
All rights reserved.