Battery screw rubber washer
I reinstalled the batteries in my Gen2 i2 and notice a rubber washer in some of the holes that caused me trouble getting the screws in. They looked like squashed o-rings so I tried to find some at three hardware stores but none had any small enough.
I installed the batteries without them but plan on getting some from McMaster- Carr. Does anyone know for certain what they are? Are they round profile o-rings or maybe square profile and what size they are? I think they could be 3 mm ID x 5 mm OD. |
I've got 3 I2's, so 6 batteries and 24 screws and I've never seen anything like you describe on any of them
Don |
Must have been a do it yourself thing then. I guess I won't be concerned about not having them if that's the case.
|
If you look at the head of one of the screws, you'll see it has a groove for the washer, which comes with the screw. The purpose is to help keep water out of the base. If you ride in wet weather, you'll probably want to have your dealer order replacements.
|
If you take a light and look closely in the hole you will see that the o-ring would only engage onto the metal bushing. I personally do not feel that it provides any waterproofing. I believe that it is being used more like a lock washer to provide some back pressure on the threads.
|
Quote:
So coming from a guy that lost a battery, should I use o-rings?:rolleyes: |
I was about to add that none of my Segs were bought new, so don't take my word that there were never any washers there
Buy a long, T handle allen wrench - $3 or $4 on eBay. It makes servicing batteries so much easier and you're more likely to get all the screws tight than if you're using a too short standard wrench. When you think they're all tight, give them a quick second check. I have mine on and off fairly frequently and have never had a screw come loose Don |
When originally issued, the i2 did have the o rings. The dimensions mentioned do seem about right.
I have gotten them at Fastenal. As to their requirement, I cannot say. I have a tendency to try to make things run as the factory created them, if I have no reason to change it... |
I ordered a pack of 25 o-rings last night. I opted for the square profile rather than round. I'll let yous know how it works out after I install them.
|
Battery screws with Rubber Washers
I have found that the Rubber Washers appear to be used to keep the screws in place when the battery is removed to keep from loosing them. The rubber washers don’t stay in place and I always remove them. I don’t believe they act a “Lock Washers” and I don’t believe they add to water prevention. There are other places that water can get into the batteries and power base.
|
All times are GMT -4. The time now is 07:15 AM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2002-2024 SegwayChat.org
All rights reserved.