Segway Fault/Help please
Hi All,
Some great info on this site, thanks. I need some help with an issue I'm having with one of my Segways. I have swapped a CU board to remove an error (E083A) but now my Segway wont start. No errors just a weird face and wont power on? Any one know what this is please or any resources that may help please? I get a face with a smile but slit eye and just the warning triangle and exclamation mark. The Segway lights go through the start up sequence but then flash 6 times :-( . Any help gratefully received. Thanks Ramsey. |
CU Pair
I recall ( but cannot guarantee ) that the CU boards need to be a matched ( programmed ) pair.
If you replace just one, the you no longer have a matched pair. Michael www.dgbint.com |
Thanks Michael. I take it only Segway can program these to match as well :-(.
What I cant understand is that I had it working, put it back together and then got a E04A error. I swapped out the BSA unit and then got this error. So it looks like this error is unmatched pair possibly but why I got the original E04 Error who knows. Its a shame Segway arent more open to competent repairs as these are as simple as a dyson to replace parts for someone with electronic training and ability (or even without to a degree) I now have it back in its original set up with a E04A error, any ideas :-( Thanks Rams |
Hi Ramsey
Sorry, I can't do much more than sympathise. For what it may be worth .. I have heard that a few faults that appear to be a peripheral device, as per the error message, are not the actual peripheral but rather due to a poor loom or loom joint. It can't hurt to take a close look at the BSA loom. Slide the BSA connectors ( both ends ) on and off a few times. Those connectors will wipe any oxidation off the pins. Good luck. |
Thanks all.
I still have a bit of tinkering to do before I get fleeced by Segway and have to send it to them or write off. Great forum by the way :-) |
Here is a thread about E04A:
https://forums.segwaychat.org/showth...highlight=E04a Not to be blunt, but the meaning of the code is not as useful as one might hope - basically there is one code that means battery dead, one code that means too cold, and all the other codes mean 🤬🤬🤬. |
All times are GMT -4. The time now is 07:30 AM. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2002-2023 SegwayChat.org.
All rights reserved. Not affiliated with Segway Inc.