SegwayChat

SegwayChat (https://forums.segwaychat.org/index.php)
-   Segway General Discussion (https://forums.segwaychat.org/forumdisplay.php?f=6)
-   -   Can anyone re-program gen1 keys? (https://forums.segwaychat.org/showthread.php?t=39386)

Stryker 04-20-2022 07:32 PM

Can anyone re-program gen1 keys?
 
I recently purchased an i167 that came with one key that works and two keys that don't. (I think they went with another segway that I did not purchase and that the seller mixed up the keys)

Can anyone reprogram the key that doesn't work so I have a back up key?

Thanks!

dgbint 04-21-2022 03:30 AM

Yes !

There are 2 parts to the issue.

Creating a data string.
To do this you need to know your keycode.
1 This can be read back from a working key.
2 This can be known if you have the original records that came with the machine.
3 This was available thru Segway, and may just still be available from some selected dealers.
With that keycode, I can assist you to create a data string.

Once you have a data string, it needs to be written to a standard iButton.
There are several options for DIY or having somebody else do it for you.

Michael
www.dgbint.com

Stryker 04-21-2022 08:39 AM

Quote:

Originally Posted by dgbint (Post 248709)
Yes !

There are 2 parts to the issue.

Creating a data string.
To do this you need to know your keycode.
1 This can be read back from a working key.
2 This can be known if you have the original records that came with the machine.
3 This was available thru Segway, and may just still be available from some selected dealers.
With that keycode, I can assist you to create a data string.

Once you have a data string, it needs to be written to a standard iButton.
There are several options for DIY or having somebody else do it for you.

Michael
www.dgbint.com

Michael, I do have a working key! Im open to any options as I have a little time while I figure out the best option to rebuild these NIMH battery packs. Do you have any information on the DIY options?

Thanks,
Brad

dgbint 04-21-2022 07:03 PM

Hi Brad

Sure.

First you will need the ability to read and write to standard iButton hardware.
There are several options.

This is what I use
https://www.ibuttonlink.com/products/ds1402d-dr8
and
https://www.ibuttonlink.com/products/ds9490r

There will be other sources so it worthwhile searching for a supplier near you.

Once you have that hardware, you will need software.
Again there are several options.
The doco that comes with the hardware should give you guidance.

Your solution will depend on whether you use a PC or an Apple, or something else.
I use a PC.

Feel free to ask, I may be able to offer limited support.

Michael
www.dgbint.com

dgbint 04-21-2022 07:08 PM

Hi again

Once you have the ability to read and write from/to iButtons, then you will need to massage data so that you write the correct data to your iButtons.

I can assist you with that too.

Ask when you are ready

Michael
michael@dgbint.com

Chapinville 06-27-2022 10:18 PM

I can program them, but you would have to send them to me so I can copy the data from the good key. I can them make the other keys any speed or turning rate you would like.


All times are GMT -4. The time now is 05:57 AM.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2002-2023 SegwayChat.org.
All rights reserved. Not affiliated with Segway Inc.