How to remove i180 fenders

[drolsinatas]

How is this done? It doesn't tell you how in the manual.

This thing rules.

[beckpm]

My dealer told me that you must remove the tire assembly to make adjustments to the position of the silver colored mud shield.

<div align="right">http://www.segwaychat.com/photos/beckpm/smallsig.GIF</div id="right">

[terryp]

Take the wheels off and you'll find two screws with oval-shaped washers at the two slots used to mount the shields.

Segway - What's holding you up?

[austin@SOH]

What you will need is a 16mm deep well socket to remove the wheel. You will need to tap on the wheel a couple times in order to loosen it from the hub. Once you remove the wheel, you will see the two screws that anchor the splash guard onto the fender. Remove these screws and adjust it as you please. Make sure when you put the wheel back on, torque it to 35 ft/lbs. If you have any other questions, please let me know.

Austin Colby
Segway of Hagerstown