i2 charging problem, weird - Page 2

Civicsman · 12-03-2011, 01:30 AM

Quote:

In the words of a poet "what's a poor boy to do?"

My recommendation is to call Jason at MTO Battery. He can help you out if anyone can.

skywatcher · 12-27-2011, 08:57 PM

Charging light is red on one battery, volt meter shows full battery at 75 volts, I can see a little red light inside the battery. Anyone figure this out?

MTOBATTERY · 12-30-2011, 10:46 AM

It "sounds like" your BMS "might have" locked the battery out for some reason. It is possible that we can reset it and the issue will go away. It is also possible that the cells and/or BMS have another issue which is causing this problem. We would not reset the BMS without thoroughly checking the cells first. Hope this helps.

Araneanz · 01-21-2012, 09:22 PM

Quote:

Originally Posted by Pkelley

Did anyone ever respond to you as to the error code E02F? I gust got E02F and no one on the forum complete the thread.

Error code: E02F

The Front CU Board reports: Fault detected in the battery pack attached to me

Araneanz · 01-22-2012, 05:26 PM

Quote:

Originally Posted by MTOBATTERY

It "sounds like" your BMS "might have" locked the battery out for some reason. It is possible that we can reset it and the issue will go away. It is also possible that the cells and/or BMS have another issue which is causing this problem. We would not reset the BMS without thoroughly checking the cells first. Hope this helps.

Is there any easy way of resetting the BMS?

dgbint · 01-22-2012, 05:39 PM

Hi

You have a Private Message.

Michael
www.dgbint.com

JoostI2 · 06-18-2016, 08:46 AM

Hello,

I need the trick to reset the bms ...

12-27-2011, 08:57 PM	#12
skywatcher New Member Join Date: May 2010 Location: North Dakota Posts: 2	same problem Charging light is red on one battery, volt meter shows full battery at 75 volts, I can see a little red light inside the battery. Anyone figure this out?

12-30-2011, 10:46 AM	#13
MTOBATTERY Member Join Date: Jan 2008 Location: York, PA Posts: 644	It "sounds like" your BMS "might have" locked the battery out for some reason. It is possible that we can reset it and the issue will go away. It is also possible that the cells and/or BMS have another issue which is causing this problem. We would not reset the BMS without thoroughly checking the cells first. Hope this helps. __________________ Warm Regards, Jason Abel Battery Builders / MTO Battery

01-22-2012, 05:39 PM	#16
dgbint Member Join Date: Apr 2003 Location: Melbourne, VIC, Australia. Posts: 991	Private message Hi You have a Private Message. Michael www.dgbint.com

06-18-2016, 08:46 AM	#17
JoostI2 Junior Member Join Date: Jun 2016 Location: The netherlands Posts: 16	Hello, I need the trick to reset the bms ...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)