07-24-2016, 09:30 AM | #1 |
New Member
Join Date: Jul 2016
Location: Moosup Ct
Posts: 2
|
Strange problem with X2
X2 turns on but shuts down after a few seconds if I don't tap the foot pad.
Runs very slowly with no error codes or unhappy face. Switched out batteries with our I2 which works fine. Same thing. It started when I put in spare batteries to charge them. |
07-26-2016, 11:28 PM | #2 |
Member
Join Date: Aug 2010
Location: Midland, TX
Posts: 175
|
Sounds like the settings have been changed to turtle mode and the shutdown if not in balance mode has been changed to lowest time. I believe the highest is 15 minutes.
__________________
Gary |
07-27-2016, 09:23 AM | #3 |
Member
Join Date: Jul 2013
Location: Arizona
Posts: 555
|
Shutdown Timeout:
Shutdown timeout is the period of time the PT will remain powered on in standby mode. Tapping the Security button will cycle through the available shutdown timeouts: 4 seconds, 30 seconds, 1 minute, 5 minutes, 15 minutes. Pressing the Information Display button will save your selected timout setting and return the InfoKey controller to normal operation. Your Speed Limit and Shutdown timeout settings will now be activated the next time you power on your PT. http://www.segway.com/media/1195/240...ser-manual.pdf |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|