|
09-19-2014, 04:39 PM | #1 |
Junior Member
Join Date: Sep 2014
Location: Israel
Posts: 39
|
segway i180 grip
Hi,
Does any one knows how the grip works? (for i180) Is it Potentiometer? if yes what are the values? Does any one try to put something instead the Original grip Thanks, R |
09-19-2014, 09:28 PM | #2 |
Senior Member
Join Date: May 2007
Location: San Jose, CA - USA
Posts: 1,314
|
It's based on magnets located on the turning part of the twist grip. The stationary part of the handlebar contains a sensor that is reported down a wire to the control board inside the handlebar.
jeff
__________________
sǝʞɔɐq ɟɟǝɾ If I had known I was going to live this long, I would have taken better care of myself. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. |
09-20-2014, 12:44 AM | #3 |
Junior Member
Join Date: Sep 2014
Location: Israel
Posts: 39
|
digital communication?
Is this digital communication?
Serial communication What kind of signal is it, Did someone ever took a scope here to check it? If yes- I can build some Arduino board to overcome this Thanks, Roee |
09-20-2014, 02:53 AM | #4 |
Member
Join Date: Apr 2003
Location: Melbourne, VIC, Australia.
Posts: 991
|
Hall Sensor(s) + Magnets
Hi
From memory; There are Hall sensors within the handlebar ( that are not readily visible ). There is a pair of magnets ( small short rod/cylinder style ) in/on the twist grip. Thus there's a weatherproof link. Error conditions include: 1 A magnet is missing. 2 A magnet is installed in the wrong orientation. 3 Both magnets are installed in the wrong orientation. Michael www.dgbint.com |
09-20-2014, 04:06 AM | #5 |
Junior Member
Join Date: Sep 2014
Location: Israel
Posts: 39
|
where can I get such a part?
At reasonable price ?
Thanks R |
09-20-2014, 02:37 PM | #6 |
Junior Member
Join Date: Sep 2014
Location: Israel
Posts: 39
|
disassembly handle-bar
Hi,
Does any one knows how to disassembly the top handle of i180 - in order to get to electronics - LCD display, I couldn't find any screw? it seems like one part - however in broken parts I see that this is from 2 parts ? Also found out that what I missing is only Magnet, all the handle right/left electronics is inside the handle Thanks, R |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|