03-27-2014, 05:13 PM | #21 |
Glides a lot, talks more...
Join Date: Jan 2004
Location: Pelham, NH, USA.
Posts: 10,356
|
First off, the two green LEDs rarely blink at exactly the same rate. It is hard to see in a photo, but they should blink, and will likely blink at different times, or slightly different times.
If both are blinking, you will see it within a minute or so of watching. If it appears that both are blinking at the same time, light is likely bleeding from one to the other lens. The suggestion to plug it in and try to start it is a great one. If you have a radio or similar problem, plugging it in before turning it on may help. Also, you can hold the info key only a couple inches from the green LEDs if the internal antenna is loose. (does happen from time to time) I agree with some of your earlier posts where you suspected that only one light is coming on. Of course, the one LED is from the front battery, so if that is the case, swap the batteries from front to back will allow you to see the other LED to come on. Good luck.
__________________
Karl Ian Sagal To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. "Well done is better than well said." (Ben Franklin) Bene factum melior bene dictum Proud past President of SEG America and member of the First Premier Segway Enthusiasts Group and subsequent ones as well. |
04-08-2014, 01:07 PM | #22 | |
Member
Join Date: Dec 2008
Location: Portland
Posts: 672
|
Quote:
One thing you could try is to hold the InfoKey very close to the baseboard and then see if it works. If it does, that is an indication that you have a problem with the radio board. However, if it still doesn't work, that unfortunately doesn't rule out the radio board or give you any new info. |
|
05-14-2015, 10:00 AM | #23 | |
Member
Join Date: May 2008
Location: New York, NY
Posts: 376
|
Quote:
Unfortunately now, I have a dead battery and haven't used it for years. I wonder if that issue's related. |
|
Tags |
i2, infokey, no power, segway, won't turn on |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|