09-13-2016, 07:07 AM | #1 |
New Member
Join Date: Sep 2016
Location: nashville/Franklin
Posts: 1
|
transporting using a reciever hitch adaptor
Has anyone posted info on how to fabricate a carrier by using a home made
unit? Also being new here I'm wondering if anyone can help with repairing an I2 it won't run and I have no idea how to check it out and find the codes and get it repaired other than taking it to a Segway dealer. |
09-21-2016, 08:42 AM | #2 |
Member
Join Date: Jan 2008
Location: York, PA
Posts: 644
|
Hi tnseg. I have no experience with the carrier. I can offer you a method to check your batteries and charger.
. Since you have an i2 the batteries will only have two contacts in the center of the wiring harness. If your batteries are good and charged you should be seeing a voltage of ~76-78VDC. If they are severely lower you may have battery issues. Before investing into batteries you will likely either need to find someone willing to let you borrow a set of lithium batteries to try on your machine or you will have to go to your closest dealer which is likely Segway of Tennessee http://segwayofnashville.com/ Segways are commonly not DIY repairable.
__________________
Warm Regards, Jason Abel Battery Builders / MTO Battery |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|