slight comfort mat woe

asifjahmed · 11-20-2006, 09:37 AM

Hello fellow gliders,

Do any of you have a solution to the comfort mat hitting the weight sensors? Every time i get off of my unit and want to shut it down, i have to bend down and lift the mat up and then shut it down. Another issue i'm having is that when i power up into PA mode, sometimes i will get a sudden red light and stick shake, as the unit thinks someone is trying to step on while it is not level.

Thanks

Gihgehls · 11-20-2006, 11:48 AM

The mat has a metal bottom. If you are cafeful, it might be possible to slightly bend the mat upwards so that it lifts the comfort mat with a bit more force.

asifjahmed · 11-20-2006, 11:52 AM

Quote:

Originally Posted by Gihgehls

The mat has a metal bottom. If you are cafeful, it might be possible to slightly bend the mat upwards so that it lifts the comfort mat with a bit more force.

Interesting, mine does not have a metal bottom..

Gihgehls · 11-20-2006, 12:01 PM

The mat, not the comfort mat. If your regular mat doesn't have a metal bottom, I think we found our cuplrit.

SEGsby · 11-20-2006, 12:05 PM

The i2 mat does not have metal, but an ABS type plastic plate that's bonded to the rubber top.

SEGsby

Gihgehls · 11-20-2006, 02:45 PM

I wasn't aware the i2 comfort mats were available yet.

asifjahmed · 11-20-2006, 02:48 PM

I will check the bottom of the mat tonight and see if it has metal

SEGsby · 11-20-2006, 03:32 PM

I've not seen nor heard of them being out yet.

SEGsbt

Quote:

Originally Posted by Gihgehls

I wasn't aware the i2 comfort mats were available yet.

Timezkware Tim · 11-20-2006, 03:46 PM

Quote:

Originally Posted by asifjahmed

Hello fellow gliders,

Do any of you have a solution to the comfort mat hitting the weight sensors? Every time i get off of my unit and want to shut it down, i have to bend down and lift the mat up and then shut it down. Another issue i'm having is that when i power up into PA mode, sometimes i will get a sudden red light and stick shake, as the unit thinks someone is trying to step on while it is not level.

Thanks

If this is about your i180, Gihgehls is correct in that it could be the metal plate at the bottom of your regular mat that needs adjustment. It's not that hard for it to get bent out of shape and mess with the senson buttons. It should be somewhat flat. If not, it could be a sticky sensor button (unlikely) Your dealer could probably tell you, if you can't figure it out. Good luck.

Tim

asifjahmed · 11-20-2006, 04:14 PM

That worked, Gihgehls, thanks a lot!

Quote:

Originally Posted by Gihgehls

The mat has a metal bottom. If you are cafeful, it might be possible to slightly bend the mat upwards so that it lifts the comfort mat with a bit more force.

11-20-2006, 09:37 AM	#1
asifjahmed Member Join Date: Sep 2006 Location: Cincinnati, OH Posts: 208	slight comfort mat woe Hello fellow gliders, Do any of you have a solution to the comfort mat hitting the weight sensors? Every time i get off of my unit and want to shut it down, i have to bend down and lift the mat up and then shut it down. Another issue i'm having is that when i power up into PA mode, sometimes i will get a sudden red light and stick shake, as the unit thinks someone is trying to step on while it is not level. Thanks __________________ Asif J. Ahmed

11-20-2006, 11:48 AM	#2
Gihgehls Senior Member Join Date: May 2006 Location: Galactic Sector ZZ9 Plural Z Alpha Posts: 2,086	The mat has a metal bottom. If you are cafeful, it might be possible to slightly bend the mat upwards so that it lifts the comfort mat with a bit more force. __________________ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. "...if you insist on being imprecise in use and unique in definition, you should hardly be surprised that your attempts at communication are poorly understood." -a wise man

11-20-2006, 12:01 PM	#4
Gihgehls Senior Member Join Date: May 2006 Location: Galactic Sector ZZ9 Plural Z Alpha Posts: 2,086	The mat, not the comfort mat. If your regular mat doesn't have a metal bottom, I think we found our cuplrit. __________________ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. "...if you insist on being imprecise in use and unique in definition, you should hardly be surprised that your attempts at communication are poorly understood." -a wise man

11-20-2006, 02:48 PM	#7
asifjahmed Member Join Date: Sep 2006 Location: Cincinnati, OH Posts: 208	I will check the bottom of the mat tonight and see if it has metal __________________ Asif J. Ahmed

11-20-2006, 12:05 PM	#5
SEGsby Senior Member Join Date: Sep 2006 Location: California Posts: 2,114	The i2 mat does not have metal, but an ABS type plastic plate that's bonded to the rubber top. SEGsby

11-20-2006, 02:45 PM	#6
Gihgehls Senior Member Join Date: May 2006 Location: Galactic Sector ZZ9 Plural Z Alpha Posts: 2,086	I wasn't aware the i2 comfort mats were available yet.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)