Your InfoKey battery gauge probably doesn't reflect the actual charge in your new batteries. It might be a good idea at this point to recalibrate the battery gauge, as Segway recommends
To recalibrate the display:
1. Fully charge the Batteries for 12 hours.
2. Discharge the Batteries (through normal use of the PT) until the
bottom bar in the Display is blinking, representing approximately 10
percent Battery charge remaining (see Figure 60).
3. Leave your PT in a safe, secure location, powered on, until the Battery
charge is fully depleted, and your PT powers down.
NOTE:
Depleting your PT Batteries from the bottom bar to empty could
take several hours.
4. Fully recharge the Batteries for a minimum of 12 hours, after which
the Battery Charge Level Display will be recalibrated.
Don
|